- Program: For most computer models: Program (zigzag stitch, width 2.0, length 0.0), enter this program seven times, (straight stitch, width 0, length 1.5-2.5) enter two times (experiment with length settings, the French Knots are spaced further apart with a longer stitch length).
-
Viking Husqvarna Genuine Specialty Candle Wicking Foot - 413162345– Fits 1,6,7 Groups NOTE: Not for IRIS™, SCANDINAVIA™ and EMERALD™ series. The Candle Wicking Foot has a deep tunnel on the underside to feed over a built up stitching. Program a "French Knot" stitch on computer Husqvarna Viking sewing machines to sew the heirloom Candle Wicking technique. Other information
-
Viking Husqvarna Genuine Candle Wicking Foot - 412-5108-45 – Fits 1, 6, 7 Groups This foot will work Husqvarna Viking Sewing Machines which have snap on feet 1, 6and 7. machine. NOTE: Not for IRIS™, SCANDINAVIA™ and EMERALD™ series. The Candle Wicking Foot has a deep tunnel on the underside to feed over a built up stitching. Program a "French Knot" stitch on computer Husqvarna Viking sewing machines to sew the heirloom Candle Wicking technique. Other information
- Program: For most computer models: Prog: (zigzag stitch, width 2.0, length 0.0), enter this program seven times, (straight stitch, width 0, length 1.5-2.5) enter two times (experiment with length settings, the French Knots are spaced further apart with a longer stitch length).
-
GENUINE Viking Husqvarna Fancy Trim Foot - Part # 4128238-45 This GENUINE foot will work with ALL Husqvarna Viking Sewing Machines which have snap on feet 1 -7 PLEASE NOTE: Not for EMERALD™ 122, 118 and 116 machines. Decorate your project with glittery sequins by using this replacement Fancy Trim Foot. This foot will easily guide the sequins through a groove at the front of the foot, while your sewing machine stitches your fancy trim in place invisible. Only circle round sequins can be used. Add sequins or decorative trim to your project. The Fancy Trim foot by Viking Husqvarna is uniquely designed with a guide at the front of the foot to assist with attaching sequins, trim and other decorative embellishments to your project. Simply attach foot, guide the embellishment of your choice through the guide and under the foot, and sew. This is a very simple and fun foot to have. With the Fancy Trim foot and your imagination, you can turn a boring project into something they will notice. Other information
- Thread with invisible thread on top and regular sewing thread in the bobbin. Snap on the Fancy Trim foot and select a Hand Look Appliqué Stitch. Adjust the stitch length to 4.5 and the width according to the width of your sequins. Make sure to use Tear-Away stabilizer underneath your fabric. 2. Slide the sequins into the groove at the front of the presser foot. Make sure you have pulled a piece of the sequin trim under the foot and through to the back of the foot before you start to sew. (Another way to put the sequins in place is to pull the sequins through the presser foot before you snap it on - whatever feels good for you.) 3. Start sewing on a scrap of your fabric, since different fabrics behave in different ways. Sew slowly to prevent sewing through the sequins. Please Note: Not for EMERALD™ 122, 118 and 116 machines.
-
Embellish your project with different types of decorative cords or yarn using beautiful Viking stitches and the Three Hole Yarn Foot. This foot will easily guide the cords or yarn through the openings in the front of the foot back through the groove under the presser foot. The decorative cords or yarn will be stitched over creating a beautiful braid embellishment.
-
Rapid Fire Hunter's Star DT02-Large Star Template by Studio 180-Deb Tucker
Rapid Fire Hunter's Star The Rapid Fire Hunter’s Star tool and technique allow for streamlined construction and precision trim down. Thus results in ease and accuracy when making these traditionally difficult blocks. Included to get quilters started on their first set of 16 blocks. Over 40 layout versions that can be made with the Rapid Fire Hunter’s Star! The Large Star Template will make 7”, 8,” 9” and 10” blocks. -
PRAIRIE POINT QUILTING RULER, 1 Inch x 2 Inch Points From Quick Points Rulers
A quilter's ruler used to make perfect picots or prairie points in a continuous row of material.The ruler measures 23 inches in length and 4 inches in diameter; made of durable, flexible polycarbonate plastic.Finished Points: 1-inch height from top to bottom, 2-inch width at base.EVER RUN OUT OF RICK RACK, OR CAN'T FIND THE PERFECT MATCH? THIS RULER MAKES PERFECT RICK RACK, FINISHED PRODUCT SIZE 1 3/8". Made in the USA. -
Clearview Triangle 12 inch 60 Degree Acrylic Quilt Ruler for Tumble Blocks Cubes
Triangle Ruler 12 inches for Drafting or Scale Drawing and Cutting by Clearview.
This is a 12 inch ruler, with easy-to-read lines and finer markings for accurate measuring, best for cutting large pieces of quick quilts.
It’s suitable for 30° and 120° angles, perfect for quick, fast and fun designs in ABC 3-D Tumbland Oh My Stars!
It is a 12 inch ruler, with easy-to-read lines and finer markings for accurate measuring.
-
Rapid Fire Hunters Star Ruler by Studio 180, quilting tool, Trim-down tool
The Rapid Fire Hunter's Star tool and technique allow for streamlined construction and precision trim down. There are multiple sizes on each tool. - Ruler size - 8 " x 8 " Item # DT01 - Block sizes - Four options - 5", 6", 7" and 8" finished blocks - Fine lines for higher accuracy - Step by step illustrated instructions included - Instructions and illustrations for left hand cutting and trimming -
O
Omnigrid Quilter's Ruler 4" X 8" R48G
Omnigrid 4 x 8" Ultimate Accuracy Ruler w/ 1/8" Grid, R48G The patented double line effect is printed in black and yellow. Which allows the user to see the grid on both dark and light fabrics. Designed for left and right handed users. 4x8 with Grid- a great size for colorwash projects.